D-Link M32 - Installation; Setup Using the D-Link Ai App

6D-Link M32 User Manual
Section 2 - Installation
Hardware Setup
Using The D-Link Ai App
The D-Link Ai app allows you to install and congure your device from your compatible Android or iOS device.
Note: The screenshots may be dierent depending on your mobile device’s OS version. The following steps show the iOS interface of the D-Link
Ai app. If you are using an Android device, the appearance may be dierent from that of the screenshots, but the process is the same.
Step 3
Place the M32 next to your mobile device. A prompt will appear - tap Add Device.
Scan the Setup code. Follow the on-screen instructions to complete the setup.
Step 1
Search and install the free D-Link Ai app available on the App Store or on
Google Play.
Step 2
Launch the D-Link Ai app from the home screen of your device.
D-Link Ai