10D-Link M32 User Manual
Section 3 - Conguration
Click on the Internet icon to bring up more details about your Internet
connection. Click IPv4 or IPv6 to see details of the IPv4 and IPv6 connection
respectively.
The Home page displays whether or not Mesh Point A is currently connected
to the Internet. If it is disconnected, click Click to repair to bring up the setup
wizard, refer to Wizard on page 15 for more information.
Click Release IP Address to release the current IP address and disconnect
from the Internet. If you wish to reconnect the Internet, click Renew IP
Address.
Click Pause Internet Access for clients to temporarily disconnect the Internet
connection, alternatively click Resume Internet Access to resume the Internet
access if previously paused.
To recongure the Internet settings, click Go to settings at the bottom-right.
Internet
M32
M32
M32
To Next Page
Loading...
Need help?
General
