D-Link N150 User Manual

21D-Link DHP-1220AV User Manual
Section 3 - Conguration
This section will show you how to congure your new D-Link Powerline AV using the web-based conguration utility.
PLC Settings
Power Saving:
Network
Name:
Public
Network
Name:
Private
Network
Name:
Network List:
Power save mode.
You can set the name of your network and to make it either
public or private. Make sure the Network Name of all of the
devices within your Powerline network is the same.
Select this option if you would like to make your Powerline
network public with the default Network Name of
“HomePlugAV”. Since this is a commonly used Network Name,
it is less secure than a private Network Name.
Select this option if you wish to make your Powerline network
more secure by using a private Network Name.
This section provides information on the network devices on
your Powerline network.

D-Link N150 Specifications

General

AC input	100 - 240 V AC, 50/60 Hz
ethernet	10/100 Mbps
WLAN	Up to 150 Mbps
powerline	Up to 200 Mbps
frequency range	2.4 GHz to 2.497 GHz
operating temperature	0 to 40 °C (32 to 104 °F)
storage temperature	-20 to 65 °C (-4 to 149 °F)
humidity operation	10% to 90% non-condensing
humidity storage	5% to 95% non-condensing

Weight and Dimensions

dimensions	73 x 58 x 37 mm (2.87 x 2.28 x 1.46 inches)
weight	96 grams (3.39 ounces)