D-Link N150 User Manual

27D-Link DHP-1220AV User Manual
Section 3 - Conguration
Admin
This page will allow you to change the administrator password, which is used to access the conguration interface and change
settings.
Enter a new password for the admin user name. The
administrator account can change the conguration
of the device.
Enter the same password that you entered in the
previous textbox in order to conrm its accuracy.
Enter a name for your gateway.
Enables a CAPTCHA verification which will require
users to type letters or numbers from a distorted image
displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your device’s
conguration. This feature is disabled by default.
Check to allow remote access to the router management
page from the Internet.
Click Save Settings to save and activate the
new changes.
Password:
Conrm
Password:
Gateway Name:
Enable
Graphical
Authentication:
Enable Remote
Management:
Save Settings:
Tools

D-Link N150 Specifications

General

AC input	100 - 240 V AC, 50/60 Hz
ethernet	10/100 Mbps
WLAN	Up to 150 Mbps
powerline	Up to 200 Mbps
frequency range	2.4 GHz to 2.497 GHz
operating temperature	0 to 40 °C (32 to 104 °F)
storage temperature	-20 to 65 °C (-4 to 149 °F)
humidity operation	10% to 90% non-condensing
humidity storage	5% to 95% non-condensing

Weight and Dimensions

dimensions	73 x 58 x 37 mm (2.87 x 2.28 x 1.46 inches)
weight	96 grams (3.39 ounces)