D-Link N150 - Network Filter

23D-Link DHP-1220AV User Manual
Section 3 - Conguration
Network Filter
Select Turn MAC Filtering O, Allow MAC addresses listed
below, or Deny MAC addresses listed below from the drop-
down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer to the
Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and click << to
copy that MAC address.
Select a schedule for the network ltering rule, or click New
Schedule to create a new schedule.
Click Save Settings to save the current conguration.
MAC Filtering
Rules:
MAC Address:
DHCP Client:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers from accessing the network
according to their MAC addresses. You can either manually add a MAC address or select the MAC address from the list of clients
that are currently connected to the DHP-1220AV.