EasyManua.ls Logo

Da-Lite DESIGNER ELECTROL - Specifications Manual

Da-Lite DESIGNER ELECTROL
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
1. Select size from charts above.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certiied.):
Matte White High Power
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), wall or ceiling
mounting type. Screen fabric to be seamless lame retardant and mildew
resistant iberglass with black masking borders standard. Bottom of fabric shall
be mounted securely into a powder coated tubular steel slat. Ends of slat shall
be protected by plastic outer caps. Steel slat pull shall be attached to slat with
screws. Fabric shall be mounted into a metal strip in a metal Camlok® roller
system without tape, glue, staples or cords so that the fabric may be easily
replaced yet cannot be pulled from the roller. Case to be plywood and/or
hardwood depending on style. Finished in veneer on all facing sides and
painted on nonfacing sides. Sturdy mounting brackets installed for wall or
ceiling installation. A 36" pull cord with plastic knob is included.
SPECIFICATION DATA
Video (NTSC 4:3) Format Dimensions (2" Standard Black Drop At Top)
Viewing Area (H x W) Nominal Diagonal A – Overall Length of Case B – Between Hanger Eyes Approx. Ship. Wt.
In. Cm In. Cm In. Cm In. Cm Lbs. Kg
50" x 67" 127 x 170 84" 213 81" 206 70" 178 29 25.4
60" x 80" 152 x 203 100" 254 95" 241 84" 213 32 14.5
69" x 92" 175 x 234 120" 305 107" 272 96" 244 39 17.7
Square Format Dimensions
Sizes (H x W) A – Overall Length of Case B – Between Hanger Eyes Approx. Ship. Wt.
In. Cm In. Cm In. Cm lbs. Kg
70" x 70" 178 x 178 81" 206 70" 178 29 13.2
84" x 84" 213 x 213 95" 241 84" 213 32 14.5
96" x 96" 244 x 244 107" 272 96" 244 39 17.7
Designer Electrol
®
Automatic Electric Projection Screen Model
PRODUCT NOTES
Matte White Surfaces will be seamless.
High Power®: Horizontal seam required when both
dimensions exceed 8'.
3. Select case style:
4. Select inish:
Veneer:
Light Oak
Medium Oak
Natural Walnut
Heritage Walnut
Mahogany
Cherry
Honey Maple
Custom
Concord Lexington Hamilton
5. Optional accessories:
No borders (Black masking borders standard.)
Pull Rod (38")

Other manuals for Da-Lite DESIGNER ELECTROL

Related product manuals