DAC GDC31 - Part Numbers; Regulatory Compliance

Equipment Installation Manual,
GDC31 Roll Steering Converter
PART NUMBERS:
The GDC31 Data Converter is available under the following part numbers:
1049-4000-01-
001( ) GDC31 Roll Steering Converter, ARINC 429 Low Speed
|
1049-4000-02-
001( ) GDC31 Roll Steering Converter, ARINC 429 High Speed
|
Software part number, where ( ) contains the number zero for initial release, or
any letter, A – Z to denote a minor change.
REGULATORY COMPLIANCE:
Software
The Model GDC31 software was developed in accordance with RTCA/DO-178B to criticality level C.
PMA
The Model GDC31 is approved via PMA.
Environmental
The Model GDC31 meets the DO-160D environmental categories listed later in this manual.
1049-2510-01 G.doc
1049-2510-01
Rev G Page 6 of 47