Equipment Installation Manual,
GDC31 Roll Steering Converter
SUPPLIED EQUIPMENT
Each Data Converter is shipped with the following items:
Part Number Description Qty
1049-4000-01-001( ) GDC31 Roll Steering Converter, ARINC 429 Low Speed 1
1049-4200-10 Installation Kit, GDC31 Data Converter 1
Part Number Description Qty
1049-4000-02-001( ) GDC31 Roll Steering Converter, ARINC 429 High Speed 1
1049-4200-10 Installation Kit, GDC31 Data Converter 1
NOTE: The Annunciator / Switch, P10280, comes pre-configured for 28V operation. For 14V operation,
see the section titled INSTALLATION - Wiring Considerations.
Complete installation kits are available under kit part number 1049-4200-10. Individual pieces are
available under the part numbers shown. Contact DAC International sales to place orders.
Part Number Description Qty
1049-4200-10 Installation Kit, GDC31 Data Converter
M24308/2-3F Connector, Receptacle, 25 pin D-Sub 1
M39029/63-368 Socket, Crimp Style, female 25
P10219 Slide Latch Kit, shell size 3 1
P10220 Backshell, 25-Pin D-Sub 1
P10280 Mode Annunciator / Switch with 28V lamps 1
P10301 Lamp, 14V 4
1049-2510-01 Equipment Installation Manual for the GDC31 1
1049-2510-01 G.doc
1049-2510-01
Rev G Page 7 of 47
To Next Page
Loading...