Equipment Installation Manual,
GDC31 Roll Steering Converter
CONTINUED AIRWORTHINESS:
This section provides data intended to assist the installer with establishing Instructions for Continued
Airworthiness as required by FARs 23.1529, 25.1529, 27.1529 and 29.1529.
1. Maintenance Manual information for the GDC31, which includes system description, removal
instructions, installation instructions and functional testing instructions, is contained in DAC
International Installation Manual, 1049-2510-01 (this document).
2. Line Replaceable Unit (LRU) part numbers and other parts contained in the installation data package
should be placed in the aircraft operator’s appropriate airplane illustrated Parts Catalog (IPC).
3. Wiring diagram information contained in the installation data package should be placed in the aircraft
operator’s appropriate airplane Wiring Diagram Manual.
4. Scheduled Maintenance Program tasks are as follows:
a. Recommended Periodic Scheduled Servicing: ........................... None required
b. Recommended Periodic Scheduled Preventive
Maintenance Tests....................................................................... None Required
c. Recommended Periodic Inspections:.......................................... None Required
d. Recommended Periodic Overhaul Period................................... None Required
e. Special Inspection Requirements................................................ None Required
5. Application of Protective Treatments.................................................... None Required
6. Special Tools.......................................................................................... None Required
7. Electrical Loads for this appliance are as specified in the DAC International Installation Manual,
1049-2510-01 (this manual).
8. There are no Airworthiness limitations associated with the installation of this appliance.
1049-2510-01 G.doc
1049-2510-01
Rev G Page 23 of 47
To Next Page
Loading...