Software Guide for Windows O/S
Software Installation
To fully utilize the functions of your CD Library, you should install the
bundled software after the computer connection in order to effectively
manage the discs for your computer. This software supports Windows
98/ME/2000/XP systems.
Note 1: CD Library software only works in 「Administrator」 mode in
Windows 2000 and XP.
Note 2: Since Windows 95(version A)/NT 4.0 does not support USB
interface; CD Library software can not be used in these 2 versions of
O/S.
Installation Guide
1. Insert the bundled CD Library software disc into your CD-ROM drive
first.
2. Autorun.exe will be executed automatically. If not, use explorer and
go to CD-Rom drive. You can find this file in the folder named 「CD
Library For Windows」. At the meantime, there is a file called
「Setup.exe」 in the folder. Click it to start installation.
3. Complete the installation according to the instruction shown in the
monitor.
4. After the installation, remove the CD Library software disc. It is
recommended to put the disc in CD Library machine for future use.
Software Operation
Starting Software
After software installation has completed, it will automatically
generate an icon on the desktop. You may directly click such
icon to run CD Library software.
CD Library software icon
To Next Page
Loading...