Note: CD Library software only works in Administrator mode in
Windows 2000 and XP. Since Windows 95 (Version A)/NT 4.0
does not support USB interface, CD Library software can not be
used in these 2 version of Windows.
Safety Precautions
This product is designed by well consideration of safety. However, a fire
or electric shock will occur due to misuse. To prevent these unexpected
situations happen, please must obey the following rules:
l When you don’t understand some of these instructions, please stop
to use this product. Please contact your local dealer nearest you.
l Please stop using the product when you find any problem.
l If you have found any strange things or rupture of electric wire, you
must stop to use this product and contact your local dealer.
l IF you have found any weird sound, smell, or smoke, unplug the
adaptor immediately. Turn off the power and contact your local
dealer.
Hardware Installation
l Single Unit Installation
l Plug the adaptor into the power source socket at the
backside of the CD Library II and plug the other end of the
adaptor to the power source outlet.
l Insert the squire end of the B-type SUB serial port cable
into the USB serial port at the backside of the rectangular
A-Type end into the USB port of the computer.
To Next Page
Loading...