PROC QI .........
Turning Pre-Brew On and Off
1. With the main programming menu accessed, push the • or •
button repeatedly until "Pre-brew" appears on the display.
2. Push the MENU button.
3. Repeatedly push the MENU button to see the pre-brew status
for each drink, Stop on the drink for which you want to turn
pre-brew on or off.
4. Push the • or • buttons to select "Yes" or "No".
5. Push the RESET button to make the change.
6. Push the • or • button repeatedly to select another feature
to change or close the front panel door to exit the main
programming menu,
Turning Tamping On and Off
1. With the main programming menu accessed, push the • or •
button repeatedly until "Tamping" appears on the display.
2. Push the MENU button.
3. Repeatedly push the MENU button to see the tamping status
for each drink, Stop on the drink for which you want to turn
tamping on or off.
4. Push the • or • buttons to select "Yes" or "No".
5. Push the RESET button to make the change.
6. Push the • or • button repeatedly to select another feature
to change or close the front panel door to exit the main
programming menu,
Changing the Used Coffee Ground Bin Meter
1. With the main programming menu accessed, push the • or •
button repeatedly until "Grounds Number" appears on the
display.
2. Push the MENU button.
3. To adjust the number of grounds detected in the bin before the
"Drawer Full" message appears on the display, push the • or
• buttons. The default setting is 20.
4. Push the RESET button to change to the new ground number.
5. Push the • or • button repeatedly to select another feature
to change or close the front panel door to exit the main
programming menu.
Automatic Coffee System
To Next Page
Loading...
Need help?
General
