Dacor CM24P-1 User Manual

Flushing Out the Coffee System
A,
B,
C.
D,
On model CM24T-1, remove the water tank from the unit. Empty it, rinse it out with
filtered water and put it back in the unit. Fill the water tank with filtered water until
full.
Fill a 16 ounce plastic bottle with filtered water, and put it in the milk compartment
and insert the milk tube into the water.
With a 2-quart container or saucepan on the drip tray to catch the rinse water,
push and hold the CLEAN (decaffeinated coffee) button until "Insert Cleanser"
appears on the display.
Push CLEAN again to immediately start rinsing out the unit. Note that if the
CLEAN button is not pressed again, the rinse will automatically start in about 20
seconds.
E. Meanwhile fill a second plastic water bottle with clean, filtered water. "Rinse" will
appear on the display. Remove the first bottle from the milk compartment and
replace it with the second. Put the milk tube into water.
F. When final rinse is complete, the display will say "Machine Ready".
G. Push the hot water button to flush the hot water dispenser.
H. Remove the milk tube from the plastic bottle. Remove the plastic bottle and close the
compartment. Remove the container or saucepan from the drip tray.
Use and Care Manual

Dacor CM24P-1 Specifications

General

Brand	Dacor
Model	CM24P-1
Category	Coffee Maker
Language	English