NO. SECTION CAPACITY [U.S.gal.
(L)] LUBRICANTS
1 Fuel -
Use only ultra low sulfur diesel (ULSD) fuel with a maximum
of 15 mg/kg (15ppm) sulfur content
2 Coolant 13.2 (50)
An antifreezing solution(Ethylene glycol) + Pure water (50:50)
3 Engine oil
1.6 (6)
Engine oil : API CJ grade above
Oil Viscosity : SAE 10W30, 10W40, 15W40
LUBRICANTS
To prevent serious equipment damage, use only genuine KIOTI uids, oils and greases, or equivalents.
Check the oil level regularly. Correct the oil level, if needed, before operating.
Always check and add oil with the tractor on a at, level surface.
•
•
WARNING
To Next Page
Loading...
Need help?
General
