051O605b
1. To drain coolant, always remove
the drain plugs from the side of
the crankcase and the bottom of
the radiator as well as the radiator
cap.With the cap installed, coolant
cannot be drained completely. (To
drain coolant from the reservoir
tank,disconnecttheoverowpipe
of the radiator cap)
2. Coolant capacity
CHANGING COOLANT
※Theabovecoolantspecicationisfor
the engine only.
3. If the radiator cap is loose or there
is a gap between the cap and seat,
coolant level can be decreased
faster.
Model Capacity
3F183T 0.9 U.S.gal (3.5 L)
4F243T 1.1 U.S.gal (4.2 L)
3FT-HI4 0.8 U.S.gal (3.4 L)
Do not use muddy water or
salty water as coolant.
When adding more coolant,
make sure that the radiator
pressure cap is firmly tight-
ened.
Do not ll the tank with cool-
ant over the “F
ULL” mark.
•
•
•
IMPORTANT
When starting the engine after
adding coolant, the coolant
level is decreased. Stop the
engine and add more coolant.
•
IMPORTANT
To Next Page
Loading...
Need help?
General
