The temperatures shown on the
left are industry standards that
necessitate a minimum glycol
content in the concentrated anti-
freeze.
When the coolant level drops
due to evaporation, add water
only. In case of leakage, add an-
ti-freeze and water in the speci-
ed
mixingratio.
Anti-freeze absorbs moisture.
Keep unused anti-freeze in a
tightly sealed container.
Do not use radiator cleaning
agents when anti-freeze has
been added to the cooling water.
(Anti-freeze contains an anti-
corrosive agent, which will react
with the radiator cleaning agent
forming sludge which will affect
the engine parts)
•
•
•
•
NOTE
AIR CLEANER (OPTIONAL)
(1) Filter (2) Cap
(3) Evacuator Valve
TE1O719A
If the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the lter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing procedure:
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5.Installthecoverandxitwiththe
clip.
When installing the cover, make
sure that the dust collection
valve is heading down.
•
NOTE
To Next Page
Loading...
Need help?
General
