Daedong KIOTI EX40 - Changing Front Axle Case OIL(N)

7
-
17
7
-
16
MAINTENANCEEX35(C)/EX40(C)/EX45(C)/EX50(C)
7
7
-
17
7
-
16
MAINTENANCEEX35(C)/EX40(C)/EX45(C)/EX50(C)
1. To drain the used oil, remove the
right and left drain plugs and fill-
ing plug at the front axle case and
drain the oil completely into the oil
pan.
2. After draining reinstall the drain
plugs.
3. Remove the oil level check plug
on the left of the front axle.
H11O618A

(1) Oil Filler Plug (2) Drain Plug
4. Add new oil to the specified lev-
el of the check plug through the oil
ller. (Refer to “Lubrication” in the
chapter “Service”.)
5. Tighten the oil ller plug after re-
plenishment.
6. Check the oil level in 15 minutes
and add oil as necessary.
(1) Oil Filler Plug
H11O619A
Oil capacity 7.5
L (1.9 U.S.gal.)
M47-EU-07.indd 17 2012-03-14 오후 7:19:08