Daedong KIOTI EX40 - 4 WD Switch

4
-
11
4
-
10
DESCRIPTION OF OPERATING SYSTEMEX35(C)/EX40(C)/EX45(C)/EX50(C)
4
-
11
4
-
10
DESCRIPTION OF OPERATING SYSTEMEX35(C)/EX40(C)/EX45(C)/EX50(C)
The 4WD (4 Wheel Driving) is to in-
crease traction by driving four wheels.
It is hydraulically operated by a sim-
ple switch operation.
To engage the 4WD, press the switch
up. To disengage it, return the switch.
The 4WD function can be used under
the following conditions:
1. If high traction is needed in a hu-
mid area.
2. When towing a trailer or using a
loader.
(1) 4WD switch
(A) ON (B) OFF
H11O411A
4WD SWITCH
3. When working on a sandy surface.
4. When the tractor is pushed out by
reaction from the implement dur-
ing cultivating on a hard surface.
5. When cultivating a eld or driving
over a bank

If the hazard lamps are turned
on for an extended period of
time while the engine is stopp-
ed, the battery can be discha-
rged. Therefore, use them only
in emergency.

The hazard lamp can be oper-
ated without the key inserted.
To avoid accident:

Engage the switch only when
the vehicle is stationary.

While the 4WD is engaged,
dri v e the v ehi c l e w i th l ow
speed as steering and braking
characteristics may differ.

It is possible to engage the
4WD during driving. Howev-
er, you may hear noise or feel
slight shift impact some at
times in this case. For safe
driving, engage the 4WD when
the tractor is stationary.

The 4WD should not be used
on a paved road as tires can
be worn faster.
CAUTION
CAUTION
M47-EU-04.indd 10 2012-04-06 오후 3:30:32