4
-
33
4
-
32
DESCRIPTION OF OPERATING SYSTEMEX35(C)/EX40(C)/EX45(C)/EX50(C)
CREEP GEAR SPEED LEVER
H11O458A
(1) Creep Gear Speed Lever
( ) High Speed
( ) Low Speed (N) Neutral
Position the creep speed lever in the
“H” position in normal conditions, and
shift it to the “L” position only when
necessary.
When the creep speed is selected,
the rotational force of the axle has
major effect on the tractor (mechan-
ical). Misuse of this lever can result
in malfunction or damage. Therefore,
note the followings:
1. It is recommended to use the
creep speed under the following
conditions
·
When cultivating a eld deeply or
shallowly
·
When it is not possible to work at
the standard speed due to hard
soil
·When transplanting
·
When working with a trencher (ag-
ricultural)
·
When loading or unloading during
driving
2. It is recommended not to use the
creep speed under the following
conditions
·
When getting out of a puddle in
muddy area
·
When towing or trailing
·
When working with a loader
·
When doing public works
3. Precautions for creep speed
·
Make sure to shift with the clutch
pedal fully depressed.
MANUAL Type
·
Start off the tractor with the park-
ing brake released.Depress the
brake pedal after disengaging the
clutch to stop the tractor.
The tractor is not braked by
de pressing the brake pe d-
al firmly without depressing
the clutch pedal at the creep
speed as rotational force of
the axle has a major effect at
the creep speed.
CAUTION
To Next Page