(1) Adjusting Bolt (2) Lock Nut
-
H11O641A
1. Stop the engine and apply the
parking brake.
2. Press the belt between the pulley
with force of 10 kg and adjust the
belt tension according to the be-
low specication.
H11O638A
3. Replace the damaged belt.
(1) Wing Bolt (2) Condenser
CLEANING AIR CONDITIONER
H11O640A
1. Open the hood and remove the
front grill of the side cover.
2. Remove the air cleaner and suc-
tion hose and unscrew the wing
bolt to remove the net.
Remove the oil cooler as necessary
to clean the condenser.
AIR CONDITIONER BELT TEN-
(1) Air Conditioner Belt
(A) tension Amount
If the front axle pivot pin adjustment
is not correct, front wheel vibration
can occur causing vibration in the
steering wheel
Loosen the lock nut, tighten the ad-
justing screw all the way, and then
loosen the screw by 1/6 turn. Re-
tighten the lock nut.
Tension of air
conditioner
belt (A)
When press the middle
point of the belt : 10~12
mm (0.39~0.47 in.)
-
CAUTION
CAUTION