MODEL
EX35(C) EX40(C)
MANUAL HST MANUAL HST
Drive train
Ground speed
(Tire for agricultural)
Km/h (M/h)
Forward (Creep)
2,600 rpm
1.4 (0.16)~23.4
[0.8 (0.1)~14.5]
0.~25.8
(0~16.0)
1.4 (0.16)~24.5
[0.9(0.1)~15.2]
0~27.0
(0~16.7)
Reverse (Creep)
2,600 rpm
1.2 (0.14)~20.8
[0.7(0.08)~12.9]
0~25.8
(0~16.0)
1.3 (0.15)~21.7
[10.8(0.09)~13.4]
0~27.0
(0~16.7)
4-wheel drive
Hydraulic powered dog clutch with
rocker switch
Quick turn (QT) None
Brake
Wet multiple plates
Differential lock Standard for rear axle
Tires
Agricultural
Front 7-16 / 6PR 8-16 / 6PR
Rear 12.4-24 / 6PR 13.6 / 24 / 6PR
Industrial
Front 27x10.5-15 / 4PR 10x16.5 / 6PR
Rear 43x16-20 / 4PR 14.9x24 / 8PR
Turf
Front 27x8.5-15 / 4PR 27x8.5-15 / 4PR
Rear 41x14-20 / 4PR 41x14-20 / 4PR
Hydraulic system
Pump capacity
L
/min (gpm) 57.8 (15.2) 63.9 (16.8)
Steering Non-load reaction type, full hydraulic
Hydraulic lift control Position, draft, mixed control
3-point hitch Category
I
Max. lifting capacity
lbs. (kg)
24in.Behind
2,383 (1,081) 2,493 (1,131)
Lower link end
2,583 (1,172) 2,940 (1,334)