[Winker Bulb]
<Front winker bulb>
① Remove the right/left back mirrior.
② Loosen the tapping screws and remove
the wind screen.
③ Loosen the washer screw and the
tapping screws.
④ Pull the front handle cover foward, and
remove the wiring.
⑤ Remove the front handle cover.
⑥ Loosen the screws and remove the
sockets.
⑦ Slightly press down on the bulbs and
turn it counterclockwise.
⑧ Install a new bulbs in the reverse order
of removal.
<Rear Winker bulb>
① Loosen the pan screws and remove the
rear combination light lens.
② Loosen the tapping screws and remove
the winker lens.
③ Slightly press down on the bulbs and
turn it counterclockwise.
④ Install a new bulbs in the reverse order
of removal.
40
RIGHT BACK MIRROR
LEFT BACK
MIRROR
WINKER
BULB
SOCKET
MARKER LIGHT
BULB
SOCKET
SCREW
SCREW
FRONT HANDLE
COVER
FRONT HANDLE
COVER
WIND SCREEN
WASHER
SCREW
WINKER
LENS
BULB
REAR COMBINATION LENS
TAPPING
SCREW
WINKER LENS
PAN SCREW
WINKER
BULB