User’s Manual
62
You can also configure encode settings by selecting Main Menu > CAMERA > Encode > Audio/Video.
After you have configured the P2P settings, on the Audio/Video page, click Next.
Encode
Configure the settings for the main/sub streams parameters.
Table 5-5 Parameter description
Channel
In the
list, select the channel that you want to configure the settings
for.
Smart Codec
Enable the smart codec function. This
function can reduce the video bit
stream for non-important recorded video to maximize the storage space.
Type
Main Stream: In the
list, select
,
(Motion Detect), or
.
Sub Stream: This setting is not configurable.
Compression
In the
list, select the encode mode.
H.265: Main profile encoding. This setting is recommended.
H.264H: High profile encoding. Low bit stream with high definition.
H.264: Main profile encoding.
H.264B: Baseline profile encoding. This setting requires higher bit stream
compared with other settings for the same definition.
Resolution
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your device
model.
Frame Rate (FPS)
Configure the frames per second for the video. The higher the value is, the
clearer and smoother the image will become. Frame rate changes along with
the resolution.
To Next Page
Loading...
Need help?
General
