Dahua Access Standalone - Alarm Log; Time Section Configuration

31
The configuration on the web will be synchronized with the configuration in the client if the
standalone is added to a client.
4.5.2 Alarm Log
You can view the alarm type and time range on the Alarm Log interface.
Select Alarm Linkage > Alarm Log. Step 1
The Alarm Log interface is displayed.
Alarm log Figure 4-10
Select a time range and alarm type, and then click Query. Step 2
The query results are displayed.
Query results Figure 4-11
Time Section Configuration 4.6
You can set periods, holiday periods, and holiday plan periods.