Dahua D-VTO3311Q-WP User Manual

Quick Start Guide
12
Dimension (mm [inch])
Installation
2.2.3 Button Model
Open the port cover of the button model, drill screw holes on the wall according to the
dimension of the mounting hole on the rear panel of the button model.
Complete the cable wiring.
Fix the port cover to the rear panel of the button model with four screws.
Fix the button model on the wall with screws.

Dahua D-VTO3311Q-WP Specifications

General

Brand	Dahua
Model	D-VTO3311Q-WP
Category	Intercom System
Language	English