Dahua D-VTO3311Q-WP User Manual

Quick Start Guide
21
Configuring SIP Servers
When connected to the same SIP server, VTOs and VTHs can call each other. You can use a VTO or
a platform as the SIP server. We recommend you use a VTO as the SIP server in the villa scenario.
Step 1 Log in to the web page of the VTO.
Step 2 Select
Network
>
SIP Server
.
Step 3 Configure the parameters.
1) If the current VTO you have logged into works as the SIP server, enable SIP Server, and
keep the default values of other parameters.
Current VTO as the SIP server
2) If other VTOs work as the SIP server, set Server Type as VTO, and then configure the
parameters.
Do not enable SIP Server, otherwise the connection fails.
Other VTOs as the SIP server

Dahua D-VTO3311Q-WP Specifications

General

Brand	Dahua
Model	D-VTO3311Q-WP
Category	Intercom System
Language	English