Quick Start Guide
23
Figure 3-8 Device properties
Step 3 Configure the parameters.
Table 3-3 Parameter description
Parameter Description
Device Type Villa Station.
Device Name The name you planned for your VTO. You could keep it null.
Villa Call No. Used to call VTHs. It should contain no more than 9 numbers.
Center Call No. Used to call the center station. It is 888888 by default.
No.
VTO number.
8001 by default when the VTO is selected to work as the SIP
server.
Group Call Enable it for group call.
Step 4 Click
Save
.
Adding VTOs
You can add other VTOs to the SIP server (in the Villa scenario a VTO serves as the SIP server), and all
the VTOs connected to the same SIP server can make video call to each other.
Prerequisites
Before you start, make sure that you have already select a VTO to work as the SIP server (VTO number
8001).
Procedure
Step 1 Log in to the web page of the VTO that works as the SIP server.
Step 2 Select
Household Setting
>
VTO No. Management
.
Step 3 Select
Add
.
To Next Page
Loading...
Need help?
General
