EasyManua.ls Logo

Dahua DH-VTO9221D

Dahua DH-VTO9221D
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
6 Functional Operation
VTO supports unlock via fingerprint, password, card, QR code, and to call MGT center
and VTH. It also supports video intercom with MGT center and VTH.
6.1 Project Setting
In Project Setting interface, for engineer config only. Password to enter is 888888.
Note:
Project setting password can be changed on WEB, see Ch 5.2.1.2.
6.1.1 IP Config
In Project Setting>IP Config interface, you can set VTO IP address, subnet mask and
gateway, see Figure 6-1.
Figure 6-1

Related product manuals