Dahua DH-VTO9221D

50
Figure 6-3
Step 2. Select method to issue card.
 Master card.
1. Select master card.
Note:
Set authorized card to be master card, referring to Ch 5.2.3.3.
2. At device card area, swipe master card.
Note:
Room no. entered shall be identical with room no. set in VTO WEB System
Config>Device Manager>Indoor Station Manager.
3. Enter room no., press OK.
4. Swipe card at card area. Please swipe card to be authorized.
After authorization is successful, it will prompt, and you can go to System
Config>Device Manager>Indoor Station Manager, click to view.
 Password
1. Select Password.
2. Enter card issuing password, click OK.
Note: