Local Configurations 50
Figure 5-6
Configure the protection parameters for password. For details, see Table 5-2. Step 9
After configuration, if you forget the password for admin user, you can reset the
password through the reserved email address or security questions. For details about
resetting the password, see "5.1.3 Resetting Password."
If you do not want to configure the settings, disable the email address and security
questions functions on the interface.
Enter the reserved email address.
In the Email Address box, enter an email address for password
reset. If you forget the password, enter the security code that you will
get from this reserved email address to reset the password of admin.
Configure the security questions and answers.
If you forget the password, enter the answers to the questions can
make you reset the password.
If you want to configure the email or security questions fucntion later or you want to
change the configurations, select Main Menu > ACCOUNT > USER.
Table 5-2
Click Save to complete the settings. Step 10
The End-User License Agreement interface is displayed.
Select I have read and agree to all terms check box. Step 11
Click Next. Step 12
The Startup Wizard interface is displayed. For details about quick settings during
startup, see "5.1.3.3 Resetting Password."
To Next Page
Loading...
Need help?
General