Local Configurations 70
Figure 5-29
Configure the settings for the snapshot parameters. See Table 5-7. Step 2
In the Manual Snap list, select how many snapshots you want to take
each time.
In the Channel list, select the channel that you want to configure the
settings for.
In the Mode list, you can select Human Face, Event, or General as
the event type for which you want to take a snapshot.
General: The snapshot is taken during the scheduled period.
Event: The snapshot is taken when there is an alarm event
occurs, such as motion detection event, video loss, and local
alarms.
Human Face: The snapshot is taken when the face is detected.
The face detection function is support only with the Channel 1.
In the Image Size list, select a value for the image. The bigger the
value is, the better the image will become.
Configure the image quality by 6 levels. The higher the level is, the
better the image will become.
Configure or customize the snapshot frequency.
Table 5-7
5.1.4.8 Configuring Basic Storage Settings
You can configure the settings for the situations when HDD is full, file length and time length of
recorded video, and the settings if to auto-delete the old files.
You can also configure basic storage settings by selecting Main Menu > STORAGE > BASIC.
To Next Page
Loading...
Need help?
General