97
Power status: Display status of two power supplies.
Memory status: Display memory status.
4.6.5 System Log
You can search and view system log information about network video decoder according to time
and log type, and backup the log to local PC.
Select Info > Device Info > System Log. Step 1
The System Log interface is displayed.
System log Figure 4-114
Configure Start Time, End Time and Type, and then click Search. Step 2
The searched logs are displayed.
Click the log to show details.
Click Clear to clear all log information of the device. Log information cannot be
cleared according to types.
Click Backup to back up the searched system log information to the PC under use.
4.6.6 Online User
You can view online users’ usernames, groups, IP addresses and other basic information.
Select Info > Device Info > Online User. The Online User interface is displayed.
Online user Figure 4-115
4.6.7 About
Select Info > Device Info > About, and you can view version information about this device.
To Next Page
Loading...