50
No. Name Description
2 Partial zoom in
When the video is in the original status, click the icon, press and
hold on left mouse button to select any area. The selected area will
be zoomed in. When the video is zoomed in, press and hold on left
mouse button to drag the video image. Click right mouse button
to restore original status.
Click the icon to zoom in and zoom out the video image with
wheel button.
3 Local record
Click the icon to record the video. The recorded video file is saved in the
recorded video path as configured in "4.5.1.10 Storage Path".
4 Snapshot
Click the icon
to take a snapshot. The snapshot file is saved in the
snapshot path as configured in "4.5.1.10 Storage Path".
5 Turn on Sound Click the icon to turn on sound of the video.
6 Close Video Close this window.
4.4.2 Signal Configuration
After adding a signal, you can view signal information or the added signal group information, and
configure signal preview.
4.4.2.1 Device Tree
Device tree displays all the added network signals.
Network signal: Display the signal sources added on the Remote Device interface. See "4.5.4.1
Network Signal".
4.4.2.2 Custom
You can customize signal group. Custom tab displays added group and signal source. You can drag
signal group to the window for loop play of signals in the group. See "4.5.4.3 Signal Group".
4.4.2.3 Image Preview
Add signal to preview window, so you can preview the video in preview window.
Select a preview window. Step 1
Select signal source in Device or Custom, and click the signal source to preview image in Step 2
the corresponding window.
4.4.3 PTZ Control Panel
PTZ control is used to adjust the direction of the PTZ device, carry out scan, preset point, point tour,
pattern and other settings. For details, see "4.3.4.9.1 PTZ Control".
To Next Page
Loading...