64
Create server certificate Figure 4-58
Install signature certificate Figure 4-59
4.5.1.9.4 Security Exception Linkage
Configure alarm linkage mode.
Select Setup > System Config > Security Management > Security Exception Linkage. Step 1
The Security Exception Linkage interface is displayed.
Security exception linkage Figure 4-60
Select Security exception alarm linkage to enable it. Step 2
Select alarm linkage mode, including Buzz and Log. Step 3
Both alarm linkage modes can be selected at the same time.
Click OK to complete configuration. Step 4
4.5.1.10 Storage Path
Select the storage path for snapshots and records.
To Next Page
Loading...