27
4 Web Operations
This chapter takes 12/15/18/21-channel 4K high definition (h.265, with 4 input ports) series
interfaces for example in most cases, which are just for your reference. 1-channel 4K high definition
(h.265) series, 4-channel 8K high definition (H.265) series, 6-channel 4K high definition (h.265, with 4
input ports) series and 9-channel 4K high definition (h.265, with 4 input ports) series have slightly
different interfaces. The actual product shall prevail.
Network Connection 4.1
Connect the Ethernet port of the decoder and the PC NIC port with network cable. Step 1
Set PC and decoder in the same IP segment. Step 2
Default IP address is 192.168.1.108.
With computer, ping ***.***.***.***(IP address of decoder) to check whether connection is Step 3
OK or not. Usually the returned TTL value should be less than or equal to 64.
Open the browser, enter IP address of decoder in the address bar, and then press Enter. Step 4
WEB controls can be recognized and downloaded automatically. System can download the
latest Web controls and remove the old one.
After login the WEB interface, change IP address of decoder according to the actual situation.
See "4.5.2 Network".
Connect the decoder to network. Step 5
System Login 4.2
Enter IP address of decoder in the address bar of the browser (take 192.168.1.108 for Step 1
example). Enter http://192.168.1.108 in the address bar, and then press Enter.
After connection succeeds, the Device Initialization interface is displayed.
Device initialization Figure 4-1
Set admin user’s password. Step 2
To Next Page
Loading...