13
3 Local Interface Configuration
Before operating on local interface, connect the display and other control devices (such as
mouse and keyboard) to the decoder.
This chapter takes 6/9/12/15/18/21-channel 4K high definition (h.265, with 4 input ports) series
and 4-channel 8K high definition (H.265) series interfaces for example in most cases, which are
just for your reference. 1-channel 4K high definition (h.265) series has slightly different
interfaces. The actual product shall prevail.
Start/Shutdown 3.1
3.1.1 Start
Connect the device to the power and then press the power button on the rear panel. You can see the
power indicator light turns on and device boots up.
3.1.2 Shutdown
You can press power button on the front panel for three seconds to shut down the device.
When decoder is working, if the power is cut off or the device is shut down forcibly, the system can
automatically connect to the front-end device and restore previous working status, once the power
connection becomes normal.
Software Interface Operation 3.2
3.2.1 Entering System Menu
Boot up the device. Step 1
The Device Initialization interface is displayed.
To Next Page
Loading...