22
The device will appear in the Added Device area.
Tick the check box of Select all, to select all devices.
In the drop-down list on the right of Show Filter, select filter criteria, and fill in the filter
value, to search the filtered device information.
Click OK to complete the settings. Step 3
3.3.6.3 Manual Add
Click Manual Add. Step 1
Manual add Figure 3-12
Configure parameters according to your actual need. Step 2
Table 3-7 Manual add parameters description
Parameter Description
Device Name
Fill in device name you want to add, and tick the check box to fill it with
white, so as to enable the device.
Manufacturer
Select a manufacturer according to the actual situation. You can add
manufacturers, including Private, Panasonic, Sony, Dynacolor, Samsung,
AXIS, Sanyo, Pelco, Arecont, Onvif, Gosuncn, LG, Watchnet, Canon, PSIA,
GB28181, AirLive and JVC.
IP Address Enter the IP address of remote device.
To Next Page
Loading...