82
Show block name Figure 4-88
Select Show Block Control ID, and control ID of every block will be shown.
Show Block Name and Show Block Control ID cannot be selected at the same time.
Click Bind Setup tab or Next. Step 4
The slot information is displayed.
Slot information Figure 4-89
Select one slot, press and hold on left mouse button to drag the slot onto the screen, and Step 5
bind the slot channel with screen.
All screens on the video wall shall be bound with slot channel; otherwise, when you
click Done, the system will prompt you that "There is sub screen without bound
decoding channel in screen!"
Slot cannot be bound repeatedly. In case of error, drag a correct slot channel onto the
screen, to cover it directly.
Click to automatically bind slot with single screen horizontally.
Click to automatically bind slot with single screen vertically.
To Next Page
Loading...