Interface Operation 54
Press time zone text box, and select local time zone, as shown in Figure 6-14.
Figure 6-14
DST setting
Press of system time and the icon becomes , so as to enable
manual setting function.
Press to enable DST.
Press DST text box, and select DST start time and end time.
6.2.6.2 Display Setting
Set VTH screen brightness, screensaver time and clean.
Press [Setting].
The system pops up “Password” prompt box.
Input login password and press [OK].
Default login password is 123456. Please refer to “6.2.6.3 Password Setting” for
details.
Select “General > Display”.
The system displays “Display” interface, as shown in Figure 6-15.
To Next Page
Loading...
Need help?
General
