Dahua Digital VTH

11
Table 3-1 SIP server parameters when a VTO works as the SIP server
Parameter
Description
IP Address
IP address of the VTO that works as the SIP server.
Port
5060 by default.
Username
Keep it default.
Password
SIP Domain
VDP.
Login Username
SIP server login username and password.
Login Pwd
 The platform (Express/DSS) works as the SIP server.
 Select Server Type as Express/DSS, configure the parameters, and then click OK.
The VTO automatically restarts, and it jumps to the login interface.
Table 3-2 SIP server parameters when the platform works as the SIP server
Parameter
Description
IP Address
IP address of the platform.
Port
5080 by default.
Username
Keep it default.
Password
SIP Domain
Keep it default or null.
SIP Server Username
SIP server login username and password.
SIP Server Password
 VTO settings have been completed if the platform or another VTO works as the SIP server.
 If the current VTO works as the SIP server, Device Manager will appear on the left. See
"3.1.1.6 Adding VTO" and "3.1.1.7 Adding VTH" to add VTOs and VTHs.
3.1.1.6 Adding VTO
Add VTO only when the current VTO works as the SIP server.
Log in to the web interface.
Select Household Setting > VTO No. Management.
VTO number management
Click Add.