The number cannot be modified.
Select NO (normally open) or NC (normally closed) according to detector type.
It shall be the same as detector type.
Select corresponding type according to detector type, including IR, gas, smoke,
urgency btn, door, burglar alarm, perimeter and doorbell.
After arm, Delay Alarm area will enter arm status at the
end of Exit Delay.
If multiple areas set the exit delay, interface prompt will
conform to maximum delay time.
Tap OK to complete setting.
4.6.3.2 Wireless Zone
Only devices with wireless function have this function.
Add, delete and set wireless zones.
Tap Setting.
Enter login password and tap OK.
Default login password is 123456. Please refer to "4.6.6.3 Password Setting" for details.
Select Alarm > Wireless Zone.
Wireless zone
Tap Add.
Tap wireless code button of wireless device. See wireless device user’s manual for
details.
After successful coding, display area info.
To Next Page
Loading...
