User’s Manual
100
5.4.3.3 Configuring Patterns
On the Expanded PTZ Control Panel, click .
The PTZ interface is displayed.
Click the Pattern tab.
The Pattern interface is displayed.
Pattern
In the Pattern box, enter the value for pattern.
Click Start to perform the directions operations. You can also go to the PTZ Control Panel to
perform the operations of adjusting zoom, focus, iris, and directions.
On the PTZ interface, click End to complete the settings.
5.4.3.4 Configuring Scan
On the Expanded PTZ Control Panel, click .
The PTZ interface is displayed.
Click the Scan tab.
The Scan interface is displayed.
Scan
To Next Page
Loading...
