User’s Manual
77
Table 5-10 Menu parameters
Main Menu Open
interface.
Search
Open the
interface where you can search and play back
record files.
PTZ Open the
interface.
View Layout
Configure the live view screen as a single-channel layout or multi-
channel layout.
Previous Screen Click Previous Screen to go to the previous screen. For example, if you
are using 4-split mode, the first screen is displaying the channel 1-4,
click
, you can view channel 5-8.
Next Screen
Add Camera
Open the
interface. For details, see "5.6 Configuring
Remote Devices."
This parameter displays on the right-click menu only after setting at
least one channel to
type in
Main Menu > CAMERA > Channel
Type
.
Manual Control
Select
, you can
configure the recording mode as
or
, or stop the recording. You can also enable or
disable snapshot function
Select
,
you can
configure alarm output settings.
Live Mode
Select
, the layout of live view screen is as default.
Select
Face, the detected face snapshots are displayed in the
bottom of the live view screen.
Auto Focus
Point to the channel window and right-click on it to open the shortcut
menu, and then click
.
Not all cameras support this function.
Image Open the
interface where you can adjust the video image color.
Camera Property Click to modify the camera properties.
Sub Port Click to switch to extra screen control.
5.2.5 AI Preview Mode
You can view the detected faces snapshots and comparison results of detected faces and the faces in
the database, and play back the recorded picture file.
To display the AI preview mode, the face detection function must be enabled. For details, see "5.11.1.1
Face Detection."
Right-click on the live view screen to display the shortcut menu, and then select
Live Mode > AI Mode,
the AI preview mode interface is displayed.
To Next Page
Loading...
Need help?
General