User’s Manual
122
TCP Port
The default value setting is 37777. You can enter the value according to
your actual situation.
User Name Enter the user name of the remote device.
Password Enter the password of the user for the remote device.
Remote CH No.
Enter the remote channel number of the remote device that you want to
add.
Decoder Strategy In the
Strategy list, select
,
, or
.
Protocol Type
If the remote device is added through private protocol, the default
type is
.
If the remote device is added through ONVIF protocol, the system
supports
,
,
, or
.
If the remote device is added through other manufacturers, the
system supports
and
.
Encryption
If the remote device is added through ONVIF protocol, enabling the
Encryption
check box will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the remote
IP camera.
Click OK to save the settings.
Only one device can be added manually at one time.
indicates successful connection and indicates connection failed.
5.6.1.4 Modifying or Deleting Remote Devices
You can modify and delete the added devices.
To modify the remote devices, do the following:
Click or double-click a device.
The Modify interface is displayed.
To Next Page
Loading...
Need help?
General