User’s Manual
125
The system will add the incremental value to the fourth segment of IP addresses of selected
devices.
Configure the settings for start IP address (the IP address is allocated in sequence), subnet
mask, default gateway, user name, and password.
Click OK to save the settings.
5.6.1.6 Exporting IP Address
You can export the added IP address to the USB storage device.
The exported information is saved in .csv file, which includes IP address, port number, channel
number, manufacturer, user name, and password.
Insert the USB storage device to the USB port of the Device.
Click Export.
The Browse interface is displayed.
Browse
Configure the save path.
Click OK to save the settings.
A pop-up message indicating "Successfully exported" is displayed.
Click OK.
When exporting IP address, the Backup Encryption check box is selected by default. The file
information includes IP address, port, channel number, manufacturer, user name, and password.
If you select the Backup Encryption check box, the file format is .backup.
If you clear the Backup Encryption check box, the file format is .csv. In this case, there might be
a risk of data leakage.
To Next Page
Loading...
