User’s Manual
177
Click to view the database details and add new faces to the database. For details,
see " Adding Face Pictures."
Select the database, and then click Modeling. The system will extract the attributes of
face pictures in the database for the future comparison.
Select the database, and then click Delete to delete the database.
Configure database
Adding Face Pictures
You can add face pictures to the existing databases one by one or by batch, or add from the detected
faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200×200–6000×5000.
Adding One Face Picture
Select Main Menu > AI > Database > Face Database Config.
The Face Database Config interface is displayed.
Click of the database that you want to configure.
The Details interface is displayed.
To Next Page
Loading...
Need help?
General