User’s Manual
236
Click to set the alarm linkage.
After setting is completed, click
OK.
(Optional) Enable the Stranger Mode.
1) Enable the Stranger mode ( ). When the detected faces do not belong to the face
database, the system remarks the face as "Stranger."
2) Click
Setting to set the alarm linkage.
3) After setting is completed, click
OK.
Click Apply to complete the settings.
After the face recognition function is enabled, right-click on the live view screen, and then select
Preview Mode > AI Mode. The AI mode live view screen is displayed.
If the detected face belongs to the enabled face database, the similarity result is displayed.
If the detected face does not belong to the enabled face database, the face will be remarked as
"Stranger."
Similarity result
5.11.2.4.3 Smart Search for Face Recognition
You can compare the detected faces with the face database and play back.
Search by attributes: Search the face database by the face attributes.
Search by picture: Search the face database by uploading face pictures.
Searching by Attributes
Select Main Menu > AI > AI Search > Face Recognition > Search by Attributes.
To Next Page
Loading...
Need help?
General