User’s Manual
278
Email
Configure the settings for the email parameters.
Table 5-50 Email parameters
Enable
Enable the email function.
There might be risk of sending data to specified email address after it is
enabled.
SMTP Server Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value setting is 25. You
can enter the value according to your actual situation.
Username
Enter the user name and password of sender’s email account.
Password
Anonymous If enable the anonymity function, you can login as anonymity.
Receiver
In the
list, select the number of receiver that you want to
receive the notification. The Device supports up to three mail receivers.
Email Address Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three senders
separated by comma.
Subject
Enter the email subject.
Supports Chinese, English and numerals. It
characters.
To Next Page
Loading...
