User’s Manual
285
Register
Configure the settings for the register parameters.
Table 5-54 Register parameters
Enable Enable the register function.
No. The default value is 1.
Server IP Address
Enter the server IP address or the server domain that you want to
register to.
Port Enter the port of the server.
Sub Service ID This ID is allocated by the server and used for the Device.
Click Apply to complete the settings.
5.15.1.12 Configuring Alarm Center Settings
You can configure the alarm center server to receive the uploaded alarm information. To use this
function, the
Report Alarm check box must be selected. For details about alarm event settings, see
"5.10 Alarm Events Settings."
Select Main Menu > NETWORK > Alarm Center.
To Next Page
Loading...
Need help?
General