27
4 Interface Operation
Main Interface
Main interface
Table 4-1 Main interface description
No. Name Description
1 Room number Number of the room where the VTH is located.
2 Info
View, delete and clear announcements
information.
When the VTH does not have an SD card, and the video-
audio message uploading function is enabled on the VTO,
three tabs will be displayed, Guest Msg, Guest Snap and
Guest Video. You can view, delete and clear the messages.
When the VTH has an SD card, the Video Pic tab will be
displayed. View, delete and clear the videos and pictures.
3 Call
Call other VTOs and VTHs.
View and manage the contacts and call records.
4 Monitor Monitor VTOs, fence stations, IPCs and NVRs.
5 SOS Make emergency call to the Call Management Center.
6 Setting
Tap to enter system setting.
Tap for more than 6 seconds, input the password set during
initialization, and then enter project setting.
7 Status
: Not connected to the network.
: Connected to the network through a cable.
: Wirelessly connected to the network.
To Next Page
Loading...
Need help?
General
